Other Products
Grease Dispensing Equipment by G.P. Reeves
Contact Us!
Contact Information
Email
Tech Notes
Oil Viscosity Chart
Special Applications
Faucet Part Sprayer
Kelgraf Lubricator Info
Pages maked with a  are stored
in Adobe Acrobat® PDF format. This is for our customers' convenience in reading, printing and saving
the information. You must have the Adobe Reader® software installed on your computer to make it work.
If you need the reader , use the link below to download a FREE copy directly from Adobe.
Download Adobe Reader
Distributed by:
MotionIndustries.com
|
| EZ LUBRICANT |
"Dry-Film" Lubricants For
Conveyors And Chains |
Discover The Advantage Of Lube Logic® Lubricants
|
- Eliminate Risk! Choosing a lubricant that is recommended by the lubricator manufacturer assures compatibility.
- Extend the life of the conveyor. Reduce drive power requirements.
|
- Keep product from swaying. Eliminate surging caused by unlubricated and worn conveyor.
- Reduce downtime and manual labor in lubricating chain and trolleys.
|
Five Gallons: $123
|
F.O.B. Shipping Point U.S.A..
|
LUBE LOGIC® LUBRICANT SPECIFICATIONS |
| Part Number |
APPLICATION AND DESCRIPTION |
FLASHPOINT (Degrees F) |
VISCOSITY (AT 100 Degrees F) |
| EZ142 |
Dry-Film Lubricant. EZ142 consists of a
high quality solvent carrier and is fortified with molybdenum disulfide (moly).
The solvent cleans and penetrates the chain, and then quickly evaporates
leaving behind microscopic moly particles. These particles provide extreme
pressure lubrication, excellent load carrying capabilities, and outstanding wear protection.
They actually prevent metal to metal contact, and therefore prevent surface scuffing. |
142 |
33 SUS |
| EZ260 |
Dry-Film Lubricant. EZ260 is designed
to quickly penetrate the area between the chain side plates at each link pin.
The light oil carrier evaporates leaving behind microscopic molybdenum
disulfide particles. These particles provide extreme pressure lubrication,
excellent load carrying capabilities, and outstanding wear protection.
They actually prevent metal to metal contact, and therefore prevent surface scuffing.
This type of "dry" lubrication is particularly effective in dusty or dirty applications
where dust or dirt can stick to a wet chain causing lubrication difficulties. |
260 |
44 SUS |
Download This Brochure (PDF)
|
(c)2006 G.P. Reeves Inc.
Send Comments or questions to Lubelogic@gpreeves.com.
|
